Commercial Roof Installation in Atlanta, GA
Advanced Roofing & Paving installs new roof systems on commercial and industrial buildings across Metro Atlanta: new construction, building additions and tenant build-outs. We work from your drawings and specifications, coordinate with your general contractor and other trades, and install every system to manufacturer requirements
New Construction and Additions
This page covers roofs on new structures. If you are replacing a roof on an existing building, see commercial roof replacement.
01
Ground-Up Construction
Complete roof assemblies for new commercial and industrial buildings
02
Building Additions
New roof areas tied cleanly into the existing roof.
03
Tenant Build-Outs
Curbs, penetrations and roof modifications for new equipment.
Roof Systems We Install
Not sure which system fits the building? Compare them on our commercial roofing systems page.
TPO
White single-ply with heat-welded seams.
EPDM
Rubber membrane for low-slope roofs.
Built-Up Roofing
Multi-ply asphalt and felt assembly.
Metal and Aluminum
Standing seam and panel systems.
Silicone-Coated Systems
Reflective coatings for added protection.
What a Complete Roof Assembly Includes
A commercial roof is more than the membrane. Every installation covers
- Deck preparation : steel, concrete or wood deck checked and ready
- Vapor retarder where the building's use calls for one
- Insulation: boards sized to the insulation value in your specifications, with tapered insulation where slope is needed for drainage
- Cover board where the specification requires it
- Membrane or panels, attached by the method the manufacturer and wind design require
- Flashing and edge metal at parapets, curbs, walls and perimeter
- Drainage: drains, scuppers and gutters placed to prevent ponding
- Penetrations: HVAC curbs, vents and pipes sealed and flashed
Our Installation Process
- Plan review. We review drawings, specifications and the roofing scope
- Bid and submittals. A written bid, then product data and shop drawings where required
- Scheduling. Coordinated with your general contractor and the other trades.
- Installation. Deck to membrane, installed in sequence and sealed at the end of each day.
- Details and penetrations. Flashed as equipment is set.
- Final inspection. Walkthrough with your team and any manufacturer inspection required for the warranty.
- Closeout. Warranty and closeout documents
Buildings We Roof
Related Commercial Roofing Services
Commercial Roof Replacement
Re-roofing existing buildings.
Commercial Roof Maintenance
Protect the new roof from day one.
Commercial Roof Inspection
Documented condition checks.
Commercial Paving
Parking lots for the new building
Recent Installation Project
Relevant Project/Case Study
building type
Client information needed
city
Client information needed
system
Client information needed
roof size
Client information needed
Commercial Roof Installation Across Metro Atlanta
We install new commercial roofs throughout Metro Atlanta and on industrial projects in Dalton and Calhoun. See our service areas.
QUESTIONS
Commercial Roof Installation FAQs
Yes. We bid from plans and specifications and coordinate our schedule with the general contractor and other trades.
It depends on roof slope, building use, rooftop equipment, energy goals and budget. TPO is common on large flat roofs; metal is common on sloped roofs. We can review the specification with you.
Yes. We install the full assembly: insulation, cover board where specified, membrane, flashing and edge metal.
Yes. We tie new roof areas into the existing system with compatible materials and proper flashing.
Yes. We also install commercial asphalt paving and striping, so the roof and lot can be handled by one contractor.
Start Your Project on a Solid Roof
Ready to make an informed decision about your roof? Contact us to schedule a professional inspection and get clear guidance on your roof needs.