Slate and Tile Roof Repair in Atlanta
Natural slate and clay tile roofs can last generations, and many older homes in Atlanta’s in-town neighborhoods still have their original roofs. These materials need repair, not replacement, in most cases. Advanced Roofing & Paving replaces broken slates and tiles, repairs flashing and keeps these roofs watertight without damaging the pieces around them.
Common Slate and Tile Problems
- Cracked, broken or slipped slates and tiles
- Rusted nails letting slates slide out of place
- Worn or corroded copper and metal flashing
- Failed underlayment beneath tile
- Damage from people walking on the roof or from previous repairs with mismatched materials
- Storm and falling-branch damage
Slate Roof Repair
We remove broken slates without disturbing the surrounding pieces, then install matching replacements using copper nails or slate hooks. Flashing at chimneys, valleys and dormers is repaired or replaced, often in copper. We avoid tar and sealant patches, which trap water and make future repairs harder.
Tile Roof Repair
Clay and concrete tiles crack under foot traffic and impact. We replace damaged tiles, reset slipped ones, and repair ridge and hip mortar or fastening. If the underlayment under the tiles has failed, we can lift and relay tiles over new underlayment, reusing the original tiles where possible.
Our Approach
- Careful inspection using roof ladders and walk boards to avoid new breaks.
- Photo documentation of broken pieces and flashing.
- Written estimate listing pieces to replace and flashing work.
- Repair with matched materials and appropriate fasteners.
What Affects the Cost
Number of broken slates or tiles
Availability of matching material
Roof height, pitch and access
Flashing type (copper vs other metal)
Condition of underlayment
Roof Systems Common on Warehouses
TPO roofing: reflective white membrane for large flat roofs
EPDM roofing: large sheets with fewer seams
Metal roofing: common on pre-engineered warehouse buildings
Silicone coatings: restoration over sound existing roofs
Common Warehouse Roof Problems
- Leaks at skylights, smoke hatches and curbs
- Ponding in low spans and at clogged drains
- Open seams across long runs of membrane
- Rusted fasteners and panel laps on metal buildings
- Damage from contractors servicing rooftop equipment
Related Services
QUESTIONS
Slate and Tile FAQs
Usually, yes. Good slate can outlast several sets of nails and flashing. Replacing broken slates and failed flashing often keeps the roof going for many more years.
We match type, color and size as closely as possible, using salvaged material where needed.
No one should walk directly on slate or tile without proper equipment. Foot traffic is a common cause of breakage.
Tar traps moisture, hides damage and makes proper repair harder later. Replacing the broken piece is the lasting fix.
Protect Your Historic Roof
Ready to make an informed decision about your roof? Contact us to schedule a professional inspection and get clear guidance on your roof needs.