EPDM Roofing in Atlanta, GA
Advanced Roofing & Paving installs and repairs EPDM rubber roofing on low-slope commercial buildings across Metro Atlanta. EPDM is one of the longest-used single-ply membranes in commercial roofing, and many Atlanta buildings still have one. We install new EPDM systems and keep existing ones watertight.
What Is EPDM Roofing?
EPDM (ethylene propylene diene monomer) is a synthetic rubber membrane. It comes in large sheets, which means fewer seams on big roofs. Seams are joined with seam tape or adhesive rather than welded. Most EPDM is black, though white versions are available.
Where EPDM Is Commonly Used
- Large low-slope roofs on warehouses and industrial buildings
- Office buildings and schools
- Roofs with limited foot traffic
- Buildings where flexibility across temperature swings matters
Key Components
- Insulation board and, where needed, tapered insulation for drainage
- EPDM membrane in the specified thickness
- Attachment: fully adhered, mechanically fastened or ballasted
- Seam tape, primers and pre-formed flashing accessories
- Edge metal, drains and termination bars
Advantages of EPDM
Proven track record on commercial roofs over several decades
Flexible in hot and cold temperatures
Large sheets mean fewer seams on wide-open roofs
Repairable with compatible patches and seam tape
Limitations to Consider
- Black EPDM absorbs heat, which can raise cooling loads in Atlanta summers
- Taped seams depend on clean surfaces and proper priming
- The membrane can shrink over time and pull at the perimeter and flashings
- Punctures from foot traffic or debris need prompt repair
EPDM Roof Installation
- Inspect the deck or existing roof; scan for wet insulation
- Install insulation to the specified insulation value
- Lay out and relax the membrane, then attach it
- Prime and tape seams
- Install flashing at walls, curbs and penetrations
- Install flashing at walls, curbs and penetrations
EPDM Roof Repair
The most common EPDM problems we fix are open seams, perimeter shrinkage pulling flashing away from walls, punctures and failed pipe-boot flashing. We clean and prime the membrane and apply compatible patches and tape. For leaks we cannot trace visually, we use infrared scanning. See commercial roof repair.
Restore or Replace an Aging EPDM Roof
If the membrane is weathered but the insulation is mostly dry, a silicone roof coating can add reflectivity and extend its life. If the insulation is widely wet, replacement is the better investment.
Is EPDM Right for Your Building?
EPDM fits large low-slope roofs with modest foot traffic. If reflectivity or welded seams are priorities, compare it with TPO roofing on our roofing systems page.
Related Services
TPO Roofing
White, heat-welded alternative.
Commercial Roof Repair
Leak tracing and seam repair.
Roof Coatings
Restore an aging EPDM roof.
Roof Maintenance
Scheduled seam and flashing checks.
QUESTIONS
EPDM Roofing FAQs
Service life depends on membrane thickness, installation, exposure and maintenance. Compare the manufacturer warranty offered with each option. See roof warranties.
EPDM can shrink over time, pulling on flashing at the perimeter and curbs. It is repairable with new flashing and securement if caught early.
Yes, if the membrane and insulation are sound. The surface must be cleaned and prepared, and wet insulation replaced first.
It depends on roof size, attachment method, insulation and tear-off. We provide a free written estimate after inspection.
They do different jobs. The visual inspection checks seams, flashing and drainage; the scan finds hidden moisture. We use both.
Keep Your Rubber Roof Watertight
Ready to make an informed decision about your roof? Contact us to schedule a professional inspection and get clear guidance on your roof needs.